Low-MOQ Supplement Bottle Suppliers
## How to weigh MOQ against unit cost When you're validating a supplement, the temptation is to chase the lowest sticker price per bottle — but a cheap bottle at a 5,000-unit minimum ties up far more cash than a slightly pricier one you can buy 1,000 at a time. For a first run, the minimum you can actually commit to usually matters more than shaving two cents off the unit. That's why amber PET Boston rounds tend to win early: their thousand-unit floor lets you test a formula and a label design without warehousing years of inventory. Once you're reordering monthly, the math flips and higher-minimum HDPE packers earn their keep. ## Material, neck, and seal decisions PET reads premium and glossy and suits capsules, gummies, and OTC-style products; HDPE is thicker-walled, opaque, and pairs cleanly with foil induction seals for powders and moisture-sensitive blends. Match the neck finish to the closure you actually plan to buy — 38/400 and 45/400 dominate this category, and a single-digit thread mismatch means the cap won't seal. Amber and UV-protective options matter if your actives degrade in light. Buying the bottle, cap, and induction liner from one listing avoids the fit problems that come from sourcing each part separately, and keeps a single lead time instead of three.
Formats in Supplements
- Boston Round Bottle60 ml, 120 ml, 240 ml · MOQ from 1,000
- Packer Bottle100 cc, 150 cc, 250 cc… · MOQ from 2,000
Browse the live catalog
Sample any format for $2.99, credited back on your bulk order.
What counts as a low MOQ for supplement bottles?
A low minimum in this category is roughly 1,000–2,000 units per SKU; the traditional factory floor is 5,000–10,000. On Tyne, amber PET Boston rounds open at 1,000 units and PET packer bottles at 2,000, so a startup can stock a single size without committing to a full pallet or paying for a custom mold.
HDPE or PET packer bottle — which suits my supplement?
Choose HDPE for powders, capsules, and moisture-sensitive blends: its thicker walls and opaque body take a foil induction seal well. Pick PET when you want a glossy, premium look for gummies or OTC-style products. Both are recyclable. HDPE packers here start at 5,000 units and $0.14; PET packers at 2,000 units and $0.19.
Which neck finish should I order — 38/400 or 45/400?
The neck finish is the thread spec, where the first number is the opening's millimeter diameter. Narrow 38/400 fits capsule and tablet bottles; wider 45/400 and 53/400 suit larger counts and scoopable powders. Order your caps and induction liners in the same finish as the bottle — a one-digit mismatch stops the cap sealing.
Do supplement bottles need an induction seal?
An induction seal is a foil liner bonded to the bottle mouth with heat, giving a tamper-evident, airtight barrier that signals freshness to buyers. It's standard for powders, probiotics, and anything moisture-sensitive. Most packer bottles in this range accept a foil-lined cap, so specify an induction-compatible closure when you pick your neck finish.
What's the difference between a packer bottle and a Boston round?
A packer bottle is a wide-mouth cylinder built to hold capsules, tablets, or powder with minimal headspace — efficient to fill and label. A Boston round has a rounded shoulder and narrower neck, reads more premium, and often comes in amber for light-sensitive liquids and tinctures. Packers maximize count; Boston rounds signal quality.
How much do stock supplement bottles cost per unit?
Stock, uncustomized bottles on Tyne run about $0.14 to $0.45 each depending on size and material, before your $2.99 sample credit is applied to the bulk order. HDPE packers are cheapest; larger PET and amber options sit at the top. Custom molds — $3,000+ elsewhere — aren't needed for these stock shapes.
Can I order supplement bottles without a custom mold?
Yes. Every bottle featured here is a stock shape, so there's no tooling charge or $3,000–$10,000 mold investment. You pick an existing size and neck finish, sample it for $2.99, and order from the listed minimum. Custom molds only make sense once your monthly volume comfortably clears several thousand units of one shape.
How long until stock supplement bottles arrive?
Featured stock bottles quote a 3–5 week lead time after you approve your order. Samples ship on their own faster track so you can test fit, finish, and labeling first. Because sampling and bulk production run as separate steps, approving your sample promptly is the simplest way to keep your launch on schedule.
Last updated 2026-07-18.